DS-140C1 Tape is 140μm nominal total thickness with double sided aggressive solvent acrylic adhesive and protected by easy release liner.
¨ Excellent Peel Adhesion ¨ Good Initial Tack
¨ Good Permanent Bonding ¨ Outstanding Temperature & Aging Resistance
Super performance, professional grade 140μm double sided tape, outstanding temperature and aging resistance. Ideal for foams, such as PE, PU, EPDM, etc. used in automobile industry.
And suitable for punching, and sticking for nameplate and thin-film switch.
Technical Data Sheet
Cut Roll: to be confirmed.
Jumbo Roll: to be confirmed.
The data above are typical results and subject to change without notice.
Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
The product should be stored at room temperature and kept from wet and heat source.
Shelf life: One year from shipment date when stored at 21°C (70°F) / 50% RH out of direct sunlight.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user's special purpose and technique.
JIANGYIN MEIYUAN INDUSTRIES CORPORATION
Address: No.11 Songwentou Road, Yunting Industry Zone, Jiangyin City, Jiangsu Province, China Postcode: 214400